RED WEAPON Base Expander
The WEAPON Base Expander is an ideal connector module for the general user’s Input/Output (I/O) needs.
The WEAPON Base Expander is an ideal connector module for the general user’s Input/Output (I/O) needs. Manufactured from lightweight and durable magnesium, this low-profile module mounts directly to the WEAPON or RED RAVEN™ BRAIN® and offers interface connections for power (DC IN), HDMI, 3G-SDI (HD-SDI), CTRL and SYNC ports (for Timecode and Genlock), as well as a 3.5mm microphone input and a 3.5mm line-level headphone out.
The WEAPON Base Expander also offers rear-mounting support for the camera system-compatible battery and power modules, such as the WEAPON REDVOLT XL Module. The low profile WEAPON Base Expander offers a variety of connectors and is ideal for run-and-gun and independent shooters.
NOTE: Only one (1) expander module can be used at a time.
Height: 4.57 in. (116 mm)
Width: 4.76 in. (121 mm)
Depth: 1.50 in. (38 mm)
|Weight||0.45 lbs (203 g)|
|BRAIN Mounting||4x M4 captive mounting screws|
|BRAIN Connections||Power delivery via WEAPON Rear pogo connector (13-Pin)
Communication via WEAPON Rear I/O connector (4×40 Pin)
|Connectors||DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
HDMI 1.2 output (Type A socket), 60 Hz max frame rate
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00B LEMO socket)
Stereo Analog Microphone input (3.5mm jack)
Stereo Headphone output (3.5mm jack)
|Battery Module Connections||Power delivery via WEAPON Rear pogo connector (13-Pin)|
|Audio||24-bit, 48 KHz, uncompressed, unbalanced mic level|
|Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||–20°C to 50°C (–4°F to 122°F)|
|Operating Humidity||0% to 85%, non-condensing|
|Storage Humidity||0% to 85%, non-condensing|
|Firmware Requirement||Compatible with all WEAPON firmware versions|