Sennheiser MZA 900 P - In-Line Preamplifier and Power Supply for EW Series Microphones

Sennheiser MZA 900 P In-Line Preamplifier and Power Supply for EW Series Microphones is a Phantom power adaptor to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs.

Usually ships in 8-10 Business Days
“Expected availability” is the estimated time to ship from the manufacturer to the Fusion Cine national distribution center. ETAs can sometimes vary depending on product availability.
SKU
MZA 900 P

This product must be purchased on our CAD store in CAD funds.


Go to this product in the CAD store

Sennheiser MZA 900 P In-Line Preamplifier and Power Supply for EW Series Microphones is a Phantom power adaptor to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs. Lockable 3.5mm jack socket. Robust chassis. Ideal if using both wired and wireless applications.

The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 - 52 V phantom powering (P12 - P48). The connected microphone is supplied via the adaptor.

The phantom power adaptor is available in two different versions:

  • MZA 900 P with lockable 3.5 mm jack socket (as evolution wireless)
  • MZA 900 P-4 with lockable 3-pin special socket

The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P(-4) for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.

The MZA 900 P can also be used as a cable tester for XLR microphone cables.

Features

  • Robust metall chassis
  • Switchable gain (0/-12dB)
  • Switchable roll-off filter (125 Hz (-3 dB), 12 dB/oct)
  • Two-colour control LED (phantom power, audio peak)
  • Input 3,5mm stereo jack socket, lockable
  • Output XLR-3M
General SpecificationsDetails
Frequency Response 20Hz - 20kHz
Gain 0/-12 dB
Output Voltage 1.8V (P48), 0.6V (P12) @ 0dB gain
Output Impedance 100 Ohm
Phantom Power P12 - P48, 10 - 52V, 2.6 - 2,8mA
Operating Temperature -20 - '60 degrees C
Dimensions 0.86 x 3.93" (22 x 100mm) (Diameter x Length)
Weight 60 g

What's Included

  • MZA 900 P with belt clip
  • Instructions for use
  • Warranty certificatee

Write Your Own Review
You're reviewing:Sennheiser MZA 900 P - In-Line Preamplifier and Power Supply for EW Series Microphones
Your Rating