Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set

The Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set includes a Teradek Bolt Pro 3000 transmitter and receiver, both equipped with 3G-SDI and HDMI ports

Expected availability: 5-9 business days
SKU
10-0985

This product must be purchased on our CAD store in CAD funds.


Go to this product in the CAD store

The Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set includes a Teradek Bolt Pro 3000 transmitter and receiver, both equipped with 3G-SDI and HDMI ports

The transmitter can pair with and multi-cast to up to four receivers (additional receivers not included). When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary.

Transmitting across the 5 GHz frequency range, the pair utilizes Dynamic Frequency Selection (DFS) to find a clean signal between the transmitter and receiver. This is desirable when working in areas with crowded frequencies. Both transmitter and receiver are equipped with HDMI and SDI ports, which allow for cross conversion from HDMI to SDI and SDI to HDMI during transmission. The transmitter also features a loop-through SDI output. The USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. The included waterproof case with custom-cut foam carries the components during transport and storage.


Transmission Distance

The Bolt Pro 3000 transmitter and receiver pair can transmit 1080p60 video up to 3000' line-of-sight with less than 1 ms of latency when not converting video formats.

Cross Conversion

The transmitter and receiver can cross convert your video signal during transmission.

Durability

The hardened aluminum chassis is designed to withstand the rigors of production and features 1/4"-20 threaded mounting holes.

TransmitterDetail
Video Input 1 x SDI, BNC (75 Ohms)
1 x HDMI
Video Output 1 x SDI, BNC (75 Ohms)
1 x HDMI
Channels Number of 20 MHz DFS Channels: 24 (200 MHz channels cannot utilize interlaced, PSF, or 1080p 60/50)
Number of 40 MHz DFS Channels: 11 (USA)
Delay <0.001 sec (When no video format conversion is enabled)
Color Sampling RGB 4:4:4 (HDMI out, 8-bit color)
Y:Cb:Cr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later)
Formats 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
1920 x 1080psF 30/29.97/25/24/23.98
1920 x 1080i 60/59.94/50
1280 x 720p 60/59.94/50
480p 59.94 (via HDMI ports only)
576 50 (via HDMI ports only)
480i/576i
NTSC/PAL
Wireless Range: Up to 3,000' / 914 m line-of-sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz (US) / 5.19 to 5.23 GHz (EU & JP)
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz (US) / 5.27 to 5.67 GHz (EU & JP)
RF Power 22 dbm EIRP (with two 5 dbi TX antennas)
Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
Audio 48 kHz, 24-bit PCM
Mounting 1/4"-20 Threaded mounting holes
Power Volts: 7 to 28 VDC
Consumption: 7.5 W
Connector: 2-pin LEMO
Dimensions 0.9 x 2.6 x 4.0" / 2.4 x 6.6 x 10.2 cm
Weight 8 oz / 226.8 g
ReceiverDetail
Video Output 1 x SDI, BNC (75 Ohms)
1 x HDMI
1 x Micro-USB 3.0
Delay <0.001 sec (When no video format conversion is enabled)
Color Sampling RGB 4:4:4 (HDMI out, 8-bit color)
Y:Cb:Cr: 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later)
Formats 1920 x 1080p 60/59.94/50/30/29.97/25/24/23.98
1920 x 1080psF 30/29.97/25/24/23.98
1920 x 1080i 60/59.94/50
1280 x 720p 60/59.94/50
480p 59.94 (via HDMI ports only)
576 50 (via HDMI ports only)
480i/576i
NTSC/PAL
Wireless Range: Up to 3,000' / 914 m line-of-sight
Non-DFS Frequencies: 5.19 to 5.23 GHz and 5.755 to 5.795 GHz (US) / 5.19 to 5.23 GHz (EU & JP)
DFS Frequencies: 5.27 to 5.55 GHz and 5.67 GHz (US) / 5.27 to 5.67 GHz (EU & JP)
RF Power 17 dbm EIRP (with one 2 dbi TX antenna)
Noise Rejection Can coexist with Wi-Fi and 5 GHz cordless phones
Audio 48 kHz 24-bit PCM
Power Volts: 7 to 28 VDC
Consumption: 8.5 W
Connector: 2-pin LEMO
Dimensions 5.5 x 3.5 x 0.9" / 13.9 x 8.9 x 2.5 cm
Weight 13.3 oz / 376 g

What's Included

  • Teradek Bolt Pro 3000 Wireless Video Transmitter/Receiver Set
  • 5 x Wireless Antennas (For Receiver)
  • 2 x Wireless Antennas (For Transmitter)
  • 2-Pin LEMO to D-Tap (18")
  • Accessory Shoe Adapter
  • Light Stand Adapter
  • 2 x SDI Cables (10")
  • HDMI Type A to A Cable (18")
  • USB 3.0 Type A to Micro B Cable (3')
  • PSU 2-Pin LEMO to AC Adapter Cable (6')
  • Waterproof Case with Custom Foam