Teradek COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in a single device measuring only 2 x 4".
Allowing you to store multiple presets, combining CDL 1D and 33-point 3D LUTs, COLR offers directors, ACs, and DITs custom looks at the touch of a button, Teradek COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right looks, and providing control of your looks over Wi-Fi, Ethernet, or USB. Various multiple devices can be used simultaneously with LiveGrade, and looks can be saved directly to COLR. COLR features HDMI and SDI inputs and simultaneous HDMI/SDI outputs. Teradek COLR supports practically every camera signal and is compatible with virtually all types of monitors.
The Teradek COLR features a built-in video scaler, deinterlacer, frame rate converter, and custom OSD tools. It also has a test pattern generator for calibration, and allows you to save and load screen images. It also offers a WebUI for look management, camera control, and network configuration. It has an OLED LCD that displays pertinent information and is designed with convenient joystick navigation buttons.
The Teradek COLR is also an addition to Teradek's Connected Set environment, which is an initiative that wirelessly synchronizes Teradek devices for a streamlined workflow.
Looks Mean Everything
During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.
Works with Pomfort LiveGrade
COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.
Monitor Calibration with SpectraCal
Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.
With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.
|Input||1 x HDMI type A input with embedded audio
1 x 3G/HD/SD-SDI on BNC input with embedded audio
|Output||1 x HDMI type A output with embedded audio
1 x 3G/HD/SD-SDI on BNC output with embedded audio
|Supported Resolutions||1080p 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
1080i 50 / 59.94 / 60
1080PsF 23.98 / 24 / 25
720p 50 / 59.94 / 60
576p 50 (HDMI only)
HDMI input supports 8-bit RGB 4:4:4, 8-bit YCrCb 4:4:4, 12-bit YCrCb 4:2:2
HDMI output is 8-bit RGB 4:4:4
SDI input/output is 10-bit YCrCb 4:2:2
|Video Processing||CDL/1024 1D LUT (supports 10-bit color)
33 x 33 x 33 3D LUT (supports 10-bit color)
|Protocol Support||Network Protocols: TCP/IP, UDP, HTTP, DHCP, MDNS/Bonjour|
Wi-Fi: 2.4/5 GHz 802.11 ac/a/b/g/n MiMO
|Power||Two-pin LEMO Power input
Nominal Power Consumption: 5 - 8 W
Auxiliary Power Input: 6-28 VDC
|Dimensions||2 x 1 x 4" (5.0 x 2.5 x 10.0 cm)|
|Weight||6 oz (170 g)|